High‐performance liquid chromatographic separations of stereoisomers of chiral basic agrochemicals with polysaccharide‐based chiral columns and polar organic mobile phases

The separation of the stereoisomers of 23 chiral basic agrochemicals was studied on six different polysaccharide‐based chiral columns in high‐performance liquid chromatography with various polar organic mobile phases. Along with the successful separation of analyte stereoisomers, emphasis was placed on the effect of the chiral selector and mobile phase composition on the elution order of stereoisomers. The interesting phenomenon of reversal of enantiomer/stereoisomer elution order function of the polysaccharide backbone (cellulose or amylose), type of derivative (carbamate or benzoate), nature, and position of the substituent(s) in the phenylcarbamate moiety (methyl or chloro) and the nature of the mobile phase was observed. For several of the analytes containing two chiral centers all four stereoisomers were resolved with at least one chiral selector/mobile phase combination.     

(2‐Aminopyrimidine‐κN1)aqua(pyridine‐2,6‐dicarboxylato‐κ3O2,N,O6)copper(II): X‐ray and DFT calculated structure

In the title compound, [Cu(C₇H₃N₂O₄)(C₄H₅N₂)(H₂O)], (I), pyridine‐2,6‐dicarboxylate (pydc²⁻), 2‐aminopyrimidine and aqua ligands coordinate the Cu^II centre through two N atoms, two carboxylate O atoms and one water O atom, respectively, to give a nominally distorted square‐pyramidal coordination geometry, a common arrangement for copper complexes containing the pydc²⁻ ligand. Because of the presence of Cu...X_bridged contacts (X = N or O) between adjacent molecules in the crystal structures of (I) and three analogous previously reported compounds, and the corresponding uncertainty about the effective coordination number of the Cu^II centre, density functional theory (DFT) calculations were used to elucidate the degree of covalency in these contacts. The calculated Wiberg and Mayer bond‐order indices reveal that the Cu...O contact can be considered as a coordination bond, whereas the amine group forming a Cu...N contact is not an effective participant in the coordination environment.     

Transition mechanisms of translational motions of bubbles in an ultrasonic field

The translation behaviors of oscillating bubbles are closely related to the polymerizations and dispersions between them, which are crucial for the ultrasonic cavitation effect. In this study, six types of translational motion of bubbles with a wide range of sizes (2–100 μm) in the R₀₁-R₀₂ plane are investigated. Our results demonstrate that in addition (to the 2nd order harmonic), the 1/2 order subharmonic can change the bubble pairs from the three states of the attraction, stable after attraction, and repulsion to that of the repulsion, coalescence, and attraction, respectively. Furthermore, within the range of the main resonance radius and the 1/2 order subharmonic resonance radius, the chaotic bubble pairs with alternating attractive and repulsive forces appear in the region between the coalescence pairs and stable pairs after attraction. Finally, the corresponding physical mechanisms of the chaotic translational motions are also revealed.     

面向高阶思维培养的自主型实验教学模式的设计与实践*

基于教育现代化、发展“互联网+教育”、培养创新性人才的指导思想,结合“超星学习通”网络平台与实验课堂的优势,设计了面向高阶思维培养的“预习自测-讲授讨论-自主实践-总结反思”的四段自主型实验教学模式,并应用于化学与化工类专业分析化学实验课程的教学实践。该实验教学模式增加了学生自主学习时间,培养了学生“分析、综合、评价和创造”等高阶思维能力,提高了实验课程的教学效率,为高等院校实践实验教学的改革提供了参考依据。     

非衍生化高效液相色谱-串联质谱法快速检测生物体液中草甘膦、草铵膦及代谢物

建立了一种非衍生化高效液相色谱-串联质谱快速检测生物体液中草甘膦、草铵膦及其代谢物等8种极性农药的方法。8种极性农药经Metrosep A Supp 5阴离子色谱柱(150 mm×4.0 mm,5μm)分离,以纯水-200 mmol/L碳酸氢铵溶液(含0.1%氨水)为流动相进行梯度洗脱,负离子多反应监测(MRM)模式进行检测。实验结果表明,8种极性农药在0.5~50 ng/mL范围内线性关系良好(r²>0.99),检出限(S/N≥3)为0.08~0.3 ng/mL,定量下限(S/N≥10)为0.3~1 ng/mL。方法的基质效应为86.5%~106%,目标化合物的回收率为81.5%~114%,日内相对标准偏差(RSD)为0.30%~2.8%,日间RSD为0.50%~5.3%。该方法无需复杂的衍生化过程,简便快速、灵敏度高、稳定性好,适用于生物体液中8种极性农药的检测。     

双活性磺酸基蔗渣木聚糖对羟基苯甲酸酯的合成及活性模拟

以蔗渣木聚糖(BX)为主要原料、氨基三磺酸钠为酯化剂,在一步酯化合成磺酸基蔗渣木聚糖酯的基础上,利用磺酸基蔗渣木聚糖酯和对羟基苯甲酸进行二步酯化反应,合成了磺酸基蔗渣木聚糖对羟基苯甲酸酯,并考察了反应条件对酯化反应的影响,通过单因素实验确定了第二步酯化反应较佳的合成工艺条件.蔗渣木聚糖酯化改性前后的样品分别用FT-IR,DG-DTG和XRD进行了表征,并对该双酯化衍生物的分子进行了优化与活性模拟.结果表明:FT-IR证明双酯化产物含有磺酸基团和对羟基苯甲酸酯基团,TG-DTG分析表明该双酯化衍生物的热稳定性提高,XRD说明发生双酯化改性后分子排列的规整性提高,结晶度增加;活性模拟实现了磺酸基蔗渣木聚糖对羟基苯甲酸酯与艾滋病毒的对接.     

Cu-BTC及其衍生物在苯甲醇选择氧化反应中的催化活性

以硝酸铜和均苯三甲酸(BTC)为原料,水热合成了一种金属有机骨架化合物Cu-BTC,在水相中催化苯甲醇选择氧化反应,H2O2氧化剂,优化了Cu-BTC的晶化条件.70℃反应1 h,Cu-BTC(110C/24 h)上的苯甲醇转化率为75.4%、苯甲醛选择性83.5%,但反应后Cu-BTC骨架完全塌陷.在氮气中高温焙烧Cu-BTC,制得衍生物Cu@C,也用于催化苯甲醇氧化反应.结果表明:Cu@C催化剂重复使用5次,可维持较高的苯甲醇转化率,但苯甲醛选择性有所下降.用X射线衍射(XRD)、N2物理吸附(BET)、热分析(TG-DSC)、红外光谱(FTIR)、能量色散X射线光谱分析(EDX)等技术对催化剂进行了结构表征,发现:Cu@C在反应中生成的Cu2O促进了苯甲醛的深度氧化.     

非均匀取代淀粉衍生物手性固定相的制备及其手性识别能力

通过区域选择性方法制备了两种新型淀粉衍生物,分别为淀粉2-苯甲酸酯-3-(4-甲基苯基氨基甲酸酯)-6-(3,5-二氯苯基氨基甲酸酯)和淀粉2-苯甲酸酯-3-(3,5-二氯苯基氨基甲酸酯)-6-(4-甲基苯基氨基甲酸酯),将二者分别涂覆于氨丙基硅胶后用作液相色谱手性固定相。研究表明:所制备的手性固定相显示出特异的手性识别能力,其手性识别能力明显高于均匀取代淀粉衍生物——淀粉三(3,5-二氯苯基氨基甲酸酯),取代基的性质及在葡萄糖单元上的位置对手性固定相的手性识别能力有较大的影响。一些未在商品化的手性柱Chiralpak AD上得到有效分离的手性化合物在所制备的固定相上得到了更好的分离。所测试的8对对映体在淀粉2-苯甲酸酯-3-(4-甲基苯基氨基甲酸酯)-6-(3,5-二氯苯基氨基甲酸酯)固定相上均得到了分离,因而此固定相的手性识别能力较强,具有潜在的应用价值。     

Naphthalimide-rhodamine based fluorescent probe for ratiometric sensing of cellular pH

The pH values of lysosomes in cancer cells is slightly lower than that in normal cells, which can be used to distinguish cancer cells from normal cells. According to this, a naphthalimide-rhodamine based fluorescent probe(hereafter referred to as RBN) with a pK_a of 4.20 was designed and synthesized for ratiometric sensing of cellular pH via fluorescence resonance energy transfer(FRET), which can respond to different pH precisely through ratiometric fluorescence intensity(Ⅰ_(577)/Ⅰ_(540)). RBN can be employed to distinguish cancer cells from normal cells on the basis of different fluorescent response, in particular, RBN showed excellent water solubility and low cell toxicity, all these are quite significant for potential application in cancer diagnose and therapy.     

A UV‐Cleavable Bottlebrush Polymer with o‐Nitrobenzyl‐Linked Side Chains

An ultraviolet (UV)‐cleavable bottlebrush polymer is synthesized using the “grafting‐onto” strategy by combining living radical polymerization and copper‐catalyzed azide‐alkyne cycloaddition (CuAAC). In this approach, reversible addition‐fragmentation chain transfer polymerization is used to prepare a poly(methylacrylate) backbone with azide side groups, while atom transfer radical polymerization is employed to prepare polystyrene (PS) side chains end‐functionalized with o‐nitrobenzyl (UV‐cleavable) propargyl groups. CuAAC is then used to graft PS side chains onto the polymer backbone, producing the corresponding bottlebrush polymers with UV‐cleavable PS side chains. The formation of the bottlebrush polymer is characterized by ¹H nuclear magnetic resonance spectroscopy, gel permeation chromatography (GPC), and Fourier transform infrared spectroscopy. The cleavage behavior of the bottlebrush polymer is monitored in tetrahydrofuran solution under UV irradiation by GPC and viscosity measurements.